top of page

Revolutionary FlexiBoard™ Technology   |     Seamless Overlap System   |    Complete Kit   |    Factory-Painted

The essential guide to installation

Transform any room with our revolutionary FlexiBoard™ panels that arrive fold-flat and unfold in seconds. The intelligent overlap joint system creates seamless, gap-free installation using just adhesive—no special tools needed!

Complete kit includes:

• 8 FlexiBoard™ panels

• Skirting board

• Dado rail

​• Touch-up paint

Why choose our FlexiBoard™ Wall Panelling Kit?

  • ✓ Revolutionary FlexiBoard™ technology – Fold-flat panels unfold in seconds, no tools needed

  • ✓ Overlap joint system – Creates seamless vertical joins without visible gaps

  • ✓ DIY-friendly installation – So easy, even DIY novices can achieve professional results

  • ✓ Factory-painted or primed options – Choose ready-to-install or custom colour

  • ✓ Complete system – Wall panels, dado rail, capping rail, and skirting board included

  • ✓ Premium MDF construction – Durable, smooth finish with many design choices 

  • ✓ Versatile application – Works on virtually any wall surface

  • ✓ Cost-effective luxury – Transform your space without breaking the bank

Unknown-3.jpg

Important: Before installation, ensure the underlying surface is in good condition.

Repair any damaged plaster, loose tiles, or structural issues.

Tools & Materials Required

Essential Tools:

  • Tape measure

  • Pencil

  • Spirit level

  • Strong construction adhesive and adhesive gun (applied in vertical beads)

  • Caulk/sealant and caulk gun (for sealing edges and joins)

  • Electric saw or jigsaw with fine-tooth blade (for trimming final panels if needed)

Optional Tools:

  • Pins or panel pins (for extra hold on uneven walls)

  • Handsaw (for small cuts around outlets)

  • Coping saw (for irregular corners)

  • Small brush (for touch-up painting)

Quick Installation Guide

Step 1: Prepare the Wall

  • Surface Preparation is Critical​​

  1. Make sure the surface is clean, dry, smooth, and free from dust or peeling paint.

  2. Fill any holes and allow the wall to dry completely before installation.​

Step 2: Mark Your Heights

  • Create Your Reference Lines​​

Using a tape measure and level:

• Mark the height for the skirting board.

• Mark the full height of the finished panelling.

• Mark the position of the dado rail.

Create a level horizontal line where the top of the panelling will sit.

Step 3: Install the Skirting Board

  • Installation Order Matters: 

  1. ​Apply strong construction adhesive to the back of the skirting board in vertical beads.

  2. Press it firmly to the bottom of the wall and check with a level.

Optional: add a few pins for extra hold on uneven walls.

Step 4: Prepare the FlexiBoard™ Panels

  • Revolutionary Fold-Flat Design

Your wall panels arrive fold-flat. Simply unfold each panel and ensure the edges are straight.

No tools are required for unfolding.

Step 5: Fix the First Panel

  • Starting Right is Essential

  1. Apply adhesive to the back of the first FlexiBoard™ panel.

  2. Place it directly above the skirting board, aligning with your level line.

  3. Press firmly so the adhesive bonds securely to the wall.

Step 6: Attach Panels Using the Overlap System

  • The Clever Overlap Joint System

Each FlexiBoard™ panel is designed to overlap the previous one, creating clean vertical joins without gaps.

  1. Slide the next panel into place so it overlaps the edge of the installed board.

  2. Press firmly to secure.

  3. Continue this process across the wall. (No nails, screws, or special tools required unless the wall is very uneven.)

Step 7: Trim the Final Panel if Needed

  • Achieving the Perfect Fit

If the last section needs trimming, cut it with a fine-toothed saw or power tool. Always test-cut a small offcut first.

Step 8: Install the Dado Rail

  • Capping Your Beautiful Panelling

  1. Apply adhesive along the back of the dado rail.

  2. Place it neatly along the top line so it caps the panelling.

  3. Press firmly and level it.

Step 8a: Install the Capping Rail

  • The Finishing Touch for a Polished Look

If your set includes a capping rail, fit it directly above the dado rail. Apply construction adhesive along the back of the rail, then press it firmly onto the wall so it neatly caps the top edge of the panels. Use a spirit level to ensure the rail is perfectly straight before the adhesive begins to set.

Step 9: Seal and Perfect the Finish

  • The Details Make the Difference

Run caulk along edges, corners, and joins for a polished look. Fill any small gaps and smooth the caulk.

Step 10: Painting and Finishing

  • Factory-Painted Sets

If your set arrives pre-painted, no additional painting is required. However, you may wish to carry out light final touch-ups after installation. Use a small brush together with the included 15 ml sample bottle of your colour to cover any visible joints, caulked areas, or minor marks.

If you selected a custom colour, your kit will include:

• a 30 ml bottle of your chosen colour, and

• a 15 ml bottle of hardener (catalyst).

Mix the colour and hardener only when ready to apply.

After mixing, the coating must be used within 30 minutes, as it will begin to thicken and change consistency once activated.

Full Installation Manual

bottom of page